STI High Pressure Steam Sterilizer Horizontal Rectangular
The unit is same as cylindrical high pressure steam sterilizer but in rectangular shape.
Triple walled, outer body made of heavy duty rolled steel/ stainless steel, inside made of thick stainless steel sheet of 304 grade. Door made of thick stainless steel. Properly insulated steam generator is made of heavy duty stainless steel. Pressure control device is fitted in all electrically operated steam sterilizer.
Boiler is made of thick stainless steel sheet suitable located under the sterilizer. Fitted with water gauge made of glass for water level, safety valve, water inlet and drain valves. A heat resistant neoprene rubber gasket is provided for totally safety of the instrument.
Pressure Control :
Provided with electrically operated PIEZOSTAT, which economics the power consumption and limits the use of release valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set pressure is achieved and re-energies the heater when pressure falls down.
High grade flanged type immersion heating elements are placed in the front side for easy replacement etc.
Safety Door :
Provided with self locking safety door which can not be opened when the chamber is under pressure. The clutch mechanism automatically disengages the threads of the radial locking system for precluding any eventuality of accident when the chamber is under pressure.
Two separate valves are provided for evacuating air and steam from inner chamber and jacket. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Panel consists of pressure control switch, main On/Off switch, indicators, relays etc. The sterilizer is provided with triple safety. First with pressure control switch, two nos. spring loaded safety valves and a dead weight safety valve. A PLUG SCREEN prevents the discharge line from choking and it can easily be removed for cleaning. A power full ejector circulates the air throughout the chamber.
Operating Temperature and Pressure:
Sterilizing Temp. 1210C
Sterilizing Pressure 1.2 to 2 kg./sq. cm.
Load 6.0 to 18.0 KW
Power Requirement Suitable to work on 440 Volts 50 Hz, 3 Phase AC only.
(W x H x D) (mm) Cap. (Ltrs.)
450 x 450 x 900 180
450 x 600 x 900 240
600 x 600 x 900 320
600 x 600 x 1200 430
600 x 750 x 1200 540
600 x 900 x 1500 810